Clampmeters

Product Code: IC-61-773

The IdealL 61-773 TRMS clamp meter measures up to 999A AC. Includes capacitance and frequency and incorporates the unique TightSight bottom display making hard-to-reach measurements convenient.

Product Code: FLUKE-376

Fluke 376 True-rms AC/DC Clamp Meter with iFlex

Product Code: ICQM1634

1000A True RMS clamp meter for non-contact voltage testing, relative and frequency measurement. Ideal for basic AC/DC current measurement. Includes carrying case.

Product Code: IC-FLUKE-1587 MDT

The products in this kit have been specifically selected for both troubleshooting and preventative maintenance applications.With the Fluke 1587, perform insulation tests, plus a wide-range of DMM tasks with confidence and ease.Use the Fluke i400 with your Fluke 1587 to accurately measure AC current without breaking the circuit.Check the rotation of three-phase motors easily and safely with the Fluke 9040.

Product Code: FLUKE-325

Fluke 325 True-rms Clamp Meter

Product Code: IC-FLUKE-323

True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable compartments.

Product Code: IC-FLUKE-324

True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The 323, 324 and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke 324 model also includes temperature and capacitance measurement capabilities.

Product Code: IC-FLUKE-373

The new Fluke 373 Clamp Meter offers improved performance perfect for any ac only current measurement situations. Featuring true-rms ac voltage and current measurements, and resistance measurement up to 6000 ohms with continuity detection, the Fluke 373 is everything you need, plus a little more.

Product Code: IC-FLUKE-374

The Fluke 374 True-rms Clamp Meter can read up to 600 V and 600 A in both ac and dc modes. Additionally, the 374 is compatible with the new iFlex flexible current probe (sold separately), which increases the measurement range to 2500 A ac and provides increased display flexibility, and improved wire access.

Product Code: ICQM1630

True RMS clamp meter for non-contact voltage testing, relative and frequency measurement. Ideal for basic AC current measurement. Includes carrying case.

Product Code: ICQM1632

True RMS clamp meter for non-contact voltage testing, relative and frequency measurement. Ideal for basic AC/DC current measurement. Includes carrying case.

Product Code: IC-FLUKE-353

The Fluke 353 digital clamp meter is the tool of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements.

Product Code: IC-FLUKE-355

The Fluke 355 digital clamp meter is the tool of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements.

Product Code: IC-DM6007

Multi-function instrument that measures ACA, ACV, DCV, Ohms, Diode, Continuity and beeper measurement.

Product Code: IC-DL6054

High precision AC mA measurement instrument for AC mA leakage current measurement.

Product Code: IC-DL9954

High precision AC mA measurement instrument for detecting leakage.

Product Code: IC-DM6046

Clamp Meter with a maximum measurement range of 1000 A DCA or ACA by contactless, inductive conductor. Can measure ACA, DCA, ACV, DCV, ohms and Diode.

Product Code: IC-AC50A

The Amprobe AC50A Clamp Multimeter with leakage current capability measures low AC current in the microamps. Great for applications requiring measurement of leakage and fault currents.

Product Code: IC-AC68C

Amprobe AC68C TRMS 600 A Clamp Meter measures non-linear load current with true-rms readings. This top-of-the-line professional clamp DMM is CAT II 600 V, CAT III 300 V rated.

Product Code: IC-ACD-10 PLUS

The Amprobe ACD-10 PLUS clamp multimeter has thinner jaws than standard digital clamp multimeters (10mm thick) allowing access to tight measurement areas and still handles conductors up to 1.0 (25mm). It combines the convenience and flexibility of an AC/DC current clamp meter with the most frequently used digital multimeter functions, including ac/dc current and voltage, capacitance, and frequency.

Product Code: IC-ACD-10 TRMS-PLUS

The Amprobe ACD-10 TRMS-PLUS clamp meter takes AC/DC measurement with TRMS accuracy and offers capacitance and frequency. It also offers thinner jaws over standard clamp meters allowing access to tight areas and still accommodates conductors up to 1.0? (25 mm).

Product Code: IC-ACD-14 PLUS

The ACD-14 PLUS clamp meter works as both an HVAC multimeter and electrical multimeter with a versatile set of features, including microamps, capacitance, frequency and temperature with included thermocouple. The dual displays show amps and volts simultaneously, useful for measuring voltage drop under load. The thinner jaws of this digital clamp multimeter enable access to tight measurement areas and still handles conductors up to 1? (25 mm).

Product Code: IC-ACD-14 TRMS-PLUS

The Amprobe ACD-14 TRMS-PLUS Digital Clamp Multimeter is the perfect choice for HVAC and electrical applications due to its versatile set of features which includes microamps, temperature with thermocouple, capacitance, frequency and true-rms accuracy. This digital clamp multimeter provides added functionality with a dual display for views of amperage and voltage simultaneously.

Product Code: IC-ACD-22SW

Amprobe's new ACD-22SW Swivel Clamp Meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places. Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Feature rich, measuring AC/DC currents, voltage, resistance and capacitance as well as CAT III 600 V safety ratings make this clamp on meter something you should swivel to see.

Product Code: IC-ACD-23SW

Amprobe's ACD-23SW Swivel Clamp Meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places. Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Feature rich, measuring AC/DC currents, voltage, resistance and capacitance as well as CAT III 600 V safety ratings make this clamp on meter something you should swivel to see.

Product Code: IC-ACD-3300 IND

This CAT IV rated ACD-3300 IND Clamp On Tester is ideal for industrial applications and utilities that require an extra level of safety. Including True-rms sensing for accuracy, this clamp on meter's extra large jaws can clamp on to those wide diameter wires making taking measurements in industrial environments simple.

Product Code: IC-ACD-41PQ

The Amprobe ACD-41PQ provides a simple and effective way to verify if the electrical system is affected by harmonics. Add on troubleshooting capabilities with the ACD-40PQ data-logging feature or get complete power analysis with the ACD-41PQ. Increase measuring efficiency with an optional PC interface kit.

Product Code: IC-ACD-50NAV

ACD-50NAV clamp-on power meter offers AC current measurements to 600 A, AC/DC voltage to 1000 V, and wide jaws to accommodate large conductors. This clamp-on multimeter is ideal for industrial power monitoring and verifying system conditions. It offers a full range of diagnostics including phase sequence, power and power factor, total harmonics distortion and individual harmonics, inrush current and low pass filter.

Product Code: IC-ACD-51NAV

This versatile clamp-on power meter offers a full range of diagnostics, including those that HVAC technicians need most: volts, amps, resistance, capacitance, DC microamps, in-rush current and temperature.

Product Code: IC-ACD-53NAV

The ACD-53NAV AC current clamp meter offers AC current measurements to 1000 A, AC/DC voltage to 1000 V, and extra large jaws to accommodate conductors up to 1.6? (40 mm) in diameter. This clamp-on multimeter offers a full range of power quality diagnostics including power and power factor, total harmonics distortion, individual harmonics, in-rush current, phase sequence, TRMS and low pass filter for industrial power monitoring and verifying system conditions.

Product Code: IC-ACD-6 PRO

This high-current clamp doubles as a multimeter for AC and DC voltage, resistance and continuity. It is simple to operate and well-suited for high current applications.

Product Code: IC-ACDC-100

Where accuracy, quality and technology meet. The ACDC-100 offers superior AC/DC measurement capabilities, highest product quality and enhanced ergonomics with red, rubber, Ribbs design.

Product Code: IC-ACDC-100 TRMS

The ACDC-100 TRMS 1000 A digital clamp meter offers superior accuracy, quality and reliability with all the basic measurement capabilities technicians need in an AC/DC current clamp meter. Use it to measure AC current to 800 A, DC current to 1000 A, and AC/DC voltage from 400.0 mV to 600 V. Its large jaws accommodate conductors up to 2? (50 mm) in diameter and its enhanced ergonomic design make it a great choice for a clamp with professional digital multimeter capabilities.

Product Code: IC-ACDC-3400 IND

The Amprobe ACDC-3400 clamp multimeter is CAT IV rated to add an extra level of safety for high voltage, industrial or utility testing applications. It is an AC/DC current clamp meter and a voltage meter all in one. This clamp-on electrical multimeter includes True RMS sensing for accuracy and dependability and extra large jaws to clamp around conductors up to 2? (51 mm) in diameter.

Product Code: IC-ACDC-52NAV

The ACDC-52NAV clamp-on power meter is the ideal choice for jobs that require AC/DC current measurements to 600 A, AC/DC voltage to 1000 V and wide jaws to accommodate large conductors. This AC/DC current clamp meter offers a full range of power quality diagnostics including power and power factor, total harmonics distortion, individual harmonics, in-rush current, phase sequence, TRMS and low pass filter for industrial power monitoring and verifying system conditions.

Product Code: IC-ACDC-54NAV

The ACDC-54NAV clamp-on power meter offers AC/DC current measurements to 1000 A, AC/DC voltage to 1000 V, temperature capabilities, and wide jaws to handle large conductors up to 40 mm for high voltage industrial environments. This clamp-on multimeter offers a full range of power quality diagnostics including power and power factor, total harmonics distortion, individual harmonics, in-rush current, phase sequence, TRMS and low pass filter for industrial power monitoring and verifying system conditions.

Product Code: IC-AD40B

The Amprobe AD40B Ammeter won’t take much space in your tool kit and offers quick and accurate measurements.

Product Code: IC-ALC-110

Prevent unplanned downtime by detecting leakage currents with the ALC-110 Leakage Current Clamp. Rated CAT III 600 V to ensure electrical safety, the ALC-110 is designed to resist external magnetic fields for highly accurate readings. Features TRMS, a mechanical jaw lock, max readings and hold functions, highest resolution of 0.001 mA (measure up to 60 A), broad frequency range (15 Hz to 1 kHz), selectable filters (low pass, appliance, no filter), selectable limits (0.25 mA, 0.5 mA, 3.5 mA, 10 mA, 12 mA) and a battery-saving design.

Product Code: IC-AMP-220

With a full range of AC/DC current, AC/DC voltage, and frequency measurement functions for basic electrical troubleshooting, the AMP-220 clamp meter with its large backlit display is an excellent amp clamp meter choice. Rated CAT III 600 V, the AMP-210 clamp meter offers True-RMS sensing, fast response processor, non-contact voltage detection, capacitance, resistance and continuity measurements to enhance efficiency and safety in today's complex electrical environments.

Product Code: IC-AMP-25

The Amprobe AMP-25 Mini-Clamp is pocket-sized, enabling quick and easy spot checks of electrical systems. With its rugged construction and CAT III 600 V rating, the AMP-25 is a must-have professional troubleshooting tool for commercial electricians and electrical contractors.

Product Code: IC-AMP-320

Whether you need an amp clamp for HVAC, general electrical or motor testing applications, the AMP-320 Clamp Meter, with its large backlit display, has the features you need. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring.

Product Code: IC-AMP-330

Clamp-on amp meter for electrical motor maintenance and HVAC testing in high voltage industrial environments. Has all the features of the AMP-320 plus a work light, peak hold, CAT IV 600 V, CAT III 1000 V safety rating and large 2.0 inch (51 mm) jaw.

Product Code: IC-CT235A

This current transformer probe measures AC or DC current. It converts high current to a low level millivolt signal for input directly into a test instrument. It can be used with standard DMMs, recorders, digital or analog meters, data loggers/DAS, oscilloscopes, or other test and measurement instruments.

Product Code: IC-DGC-1000A

Make accurate ground resistance measurement with the DGC-1000A clamp tester. Simple and easy to use; requires no test leads or auxiliary electrodes. Has data logging and can store up 116 records.

Product Code: IC-SC220

The SC220 is an affordable, auto-ranging, digital multimeter for HVACR professionals that offers standard multimeter ranges. Also includes microamps DC for flame rectification, with built-in non-contact voltage and a continuity beeper for additional utility.

Product Code: IC-DM6008

Clamp Meter True Rms that measures DCA and ACA on the inductive conductor.

Product Code: IC-SC240

The SC240 Compact Clamp Meter measures temperature, capacitance and includes non-contact voltage indicators in addition to standard clamp meter ranges.

Product Code: IC-FLUKE-365

The Fluke 365 is a new, innovative Fluke clamp meter, offering a thin, small jaw design that makes it easy to get around tightly packed wires.The Fluke 365 is a rugged meter perfect for jobs where access to wires is difficult. The 365's thin, small jaw is detachable with a flexible lead, which makes gaining access to wires and viewing the display easier than ever.

Product Code: IC-FLK-VT04 E-KIT

This combo kit is built around the essential tools needed for electrical troubleshooting and maintenance task. Comes with Fluke VT04 infrared thermometer, Fluke 376 Clamp Meter and the Fluke 117 Digital Multimeter for maximum utility, value and savings.

Product Code: IC-CM78

The FLIR CM78 is a True RMS industrial clamp meter for the electrician who works on high-powered equipment and temperature systems and needs a safe, capable combination tool.